Free shipping on purchases over $50

Trouble shooting of automatic continuous sealing machine

Trouble shooting of automatic continuous sealing machine

Trouble shooting of automatic continuous sealing machine

 

When it comes to automatic continuous sealing machine, I believe most business users are familiar with it. It is a branch of sealing and packaging machinery. To make up for the shortcoming that the sealing machine can't be used continuously in the use process, the automation of the machine is put forward, making the machine more convenient. It has been widely used by food, daily chemical and pharmaceutical manufacturers in the market. In the actual use process, users will also encounter some machine failures, so what are these problems and how to solve them? Today, I will tell you about the failures and solutions of automatic continuous sealing machine.

 

Trouble shooting of automatic continuous sealing machine

 

Frequently asked questions:

 

  1. Problem: loud noise.

 

Methods: Most of the noise is caused by the lack of lubricating oil or loose parts of the machine. Check the whole machine to see if the parts of the machine are loose or oiled, and repair them.

 

  1. The seal is not firm.

 

Methods: (1) Insufficient temperature

The heating time of the machine is not enough, so let the machine heat for a few more minutes before processing;

 

(2) The printer is loose

 

The printer of our machine is loose, which leads to the unstable opening of the packaging bag. Contact the maintenance personnel to repair the printing wheel.

 

(3) The heater is broken.

 

If the heater of the machine is broken, the seal is not firm, so you need to contact the maintenance personnel for maintenance.

 

(4) The transmission speed is too fast.

 

If the transmission speed is too fast, the sealing will be heated by the machine in the future, so the next step will be entered, which will lead to the unstable sealing. Debug the conveyor belt speed of the machine;

 

(5) The thickness of packaging bags.

 

Sometimes the seal is not firm because of the relationship between the material and thickness of the packaging bag. If the thickness of the packaging bag is too thick, the seal will not be firm. At this time, it is necessary to adjust the heat sealing temperature of the machine to solve this problem.

 

  1. Incomplete printing port

 

(1) the temperature is too high

The sealing temperature of the machine is too high, which will cause bubbles in the sealing of the packaging bag and affect the printing process, so the temperature should be adjusted according to the packaging bag;

 

(2) There are stains on the printer.

When there are stains on the printing wheel, it will affect the sealing effect if it is not cleaned, so it is necessary to clean the printing wheel.

 

The above is an introduction to the failures and solutions of automatic continuous sealing machine. I hope the knowledge today can help users solve some problems in the actual use process.

Dejar un comentario: